A Full Guide for Gluing Tiles To The Wall

Gluing tiles to the wall has become a favorite procedure among homeowners and building contractors. Stay connected to this post as we walk you through all you need to know about this modern tiling method.

A Full Guide for Gluing Tiles To The Wall

Tilers have different ways of gluing tiles to the wall. Professional tilers may opt for the thin-set mortar to glue tiles to horizontal or vertical walls.

On the other hand, inexperienced tilers may choose adhesives for gluing tiles to a vertical wall.

Whether you are thinking of using adhesives or thin-set mortar, all that matters most is to have the required guide to glue tiles to the wall. Most tilers use polymer paste, known as mastic.

For a perfect gluing of tiles to the wall, the following guidelines and tips will help you achieve effective tiling.

Guides for Gluing Tiles To the Wall

Gluing tiles to the wall is one thing; knowing the number of tiles you’ll need for your entire wall depends on the room’s shape.

For instance, you’ll need to divide the area the tile will cover into different compartments for an irregular-shaped room.

Regardless of the shape, measure each section’s size (width and height) that the tile will cover. With a tape measure, take the measurement of the area and multiple by two. The result will give you the square meters of the number of tiles you’ll need.

Step 1: Layout Mastic in an Appropriate Manner

The first step in gluing tiles to the wall is to spread mastic. You should begin by spreading mastic appropriately on the surface of the wall you want to tile.

It is best to spread mastic using a towel. Make sure you apply the mastic amount you can cover within sixty minutes.

This will help to glue tiles properly when you place tiles on them. If you spread mastic above the limit, you may not cover within an hour, and it may not hold the tiles properly.

If this happens, the consequence can be dire on the outcome of the work.

Step 2: Scrapping the Mastic

After spreading the mastic appropriately, you’ll need to start the process of scrapping the mastic. Use the notched side of the trowel to scrape the mastic carefully.

For many tiles available in the market, the depth of notches should not exceed the tile’s thickness.

However, you may need deeper notches for heavyweight tiles. It is best to check with the supplier to find out about the best towel for the job.

Step 3: Begin Tiling from the Top

Once you are done with the scrapping, it’s time to start tiling properly. Make sure you begin the entire process at the upper part or end of the section on which you have applied the mastic.

Continue placing tiles towards the other end. Ensure to apply pressure when pressing tiles to the wall.

This will not only help you to avoid fall-off but will also help notches scrape on a substrate under it. If there is excess mastic, get them back into the container.

Step 4: Tile placing

The next step to glue tiles to the wall is to start placing the tiles. Now that the topmost section is set, you can start placing the tiles. Get your tiles closer and place them in a position on the wall.

Apply pressure on it to make sure it presses into the mastic.

By the time you release the pressure exerted on the tile, it should remain at the same point.

If you notice there is a slight movement, you may need to replace it and apply more pressure on it. This will help to make it stronger.

Step 5: Put Spacers

Don’t forget to put spacers around the tiles. As you do this, put more tiles to fit into place around the first tile. As you proceed, apply more spacers around the tiles.

Avoid stopping until you have finished all the sections. After covering the whole area, you can spread more mastic to be covered in an hour.

You should repeat the same process from the beginning until your wall is fully tiled. To make your work look smoother, neater, and attractive, you should ensure to clean your trowel frequently.

You can clean it using water to make it easier to use. Alternatively, you may need to get a slightly wet rag closer to you to make sure your hands are not dirty.

Gluing Tiles To The Wall (1)

What Do We Love About Mastic Adhesive?

It is easy to use

One thing tillers will love to see when they want to glue tiles to the wall is the easiness of placing them. This is what mastic adhesive offers.

Compared to other forms of tile gums, the mastic is pretty easier to spread over the board. As an adhesive, it makes it easier to work with mastic, even than mortar.

Wall tiling is easier with mastic because it spreads out evenly. Additionally, mastic help tiles to have a good binding area, making them attractive at the same time.

Besides, mastic isn’t as thick as other tile gums that make it easier to work with.

Additional strength to hold tiles

Another edge the mastic material has over other forms of tile gums is tensile strength to hold tiles in place.

Lots of tilers choose mastic for ceramic tiles, including other heavyweight materials such as marble or stone.

This is due to the extra strength the mastic has to hold tiles to the wall. Different people adopt mastic due to its strength for gluing tiles to the wall, especially in an area where water flows from time to time.

Mastic’s extra strength is one of the reasons people use it in shower enclosures. Mastic adhesive can last for an extended number of years without any need to repair.

Quick setting

Mastic adhesive has a quick setting. Although there are other downsides of it, the downsides can, however, be an advantage.

It makes it easier and quicker when it comes to setting heavyweight tiles. The quick setting makes it faster to complete more works.


1. What is the best adhesive to glue tiles to the wall?

The best adhesive to use to glue tiles to the wall depends on what you prefer. While some tilers may opt for mortar, some may choose to go for mastic adhesive.

The best adhesive, however, depends on the one you are most comfortable with.

2. Can I glue tiles to my wall?

Commonly, many people choose to tile drywall or floor with the use of mortar. However, you may also use an organic adhesive known as mastic to attach your tiles to your wall.

In some cases, you may also opt for epoxy. You, however, need to apply mastic over the surface of drywall which makes it appropriate for wall use.

3. What adhesive should I use for my shower tile?

The best adhesive for shower tiles also depends on choice. While mastic can provide extra strength for wall tiles, it can also be best for shower tiles.

Some DIY’ers also use premixed thin-set mortar. This is narrowed to one’s choice.


Gluing tiles to the wall can be a daunting task if you do not know the required tips and guide for gluing tiles to the wall.

However, it is easier to glue tiles to the wall when you have the right tips. Whether you are a professional or inexperienced tiler, you should find out the best adhesive that works for you.

If you find the above guide to glue tiles to the wall will be difficult, gluing tiles to the wall using a DIY method shouldn’t be a big problem. This way, you can save yourself a few dollars.

However, you may quickly need to catch up from there. With the above tips, you will find yourself saving a few bucks. Additionally, you will be able to glue the tiles neatly and appropriately.