How To Start Echo Blower

Table of Contents

The Echo Blower is a gas-powered leaf blower. It is used to blow leaves, grass clippings, and other debris from your yard.

There are many different models of Echo Blower, each with unique features.

The most popular model is the Echo PB-770T, which features a two-stroke engine and a tube-fed design.

Other models include the Echo PB-580T, which has a four-stroke engine, and the PB-265LN, a backpack Leaf Blower.

No matter which model you choose, the Echo Blower will make short work of any leafy mess.

If you’re not sure how to start your Echo Blower, consult the manual that came with your model. Generally, however, you’ll need to do the following:

PB-580T

The PB-580T is a backpack blower designed for professional use.

It is powered by a two-stroke engine and has a padded backrest and straps for comfort during extended use.

To start the PB-580T, first, pour gasoline into the gas tank. Then prime the blower by pushing the primer bulb a few times.

Finally, pull the starter cord to start the engine. The PB-580T is a powerful tool that can help you quickly and easily clear leaves and debris from your property.

PB-755ST

The PB-755ST is a powerful Echo Blower that can help you quickly clear leaves and debris from your property.

Before using the PB-755ST, it is essential to read the operator’s manual to understand how the machine works.

Also, ensure the fuel tank is complete before starting the engine.

To start the engine, prime the engine by depressing the primer bulb a few times. And then pull on the starter cord.

Use the throttle to control the speed of the blower as you are clearing leaves and debris.

The PB-755ST can provide years of reliable service with proper care and maintenance.

PB-2520

Keep your yard tidy all year long with the Echo PB-2520 backpack blower.

This powerful blower is powered by a two-stroke engine, making it ideal for clearing leaves, debris, and even light snowfall.

It features a padded backrest and straps for comfort during extended use. The cruise control feature allows you to maintain a consistent speed while blowing.

Plus, with a lightweight design and easy-start technology, the PB-2520 is ready to help you tackle any yard cleanup project.

To start the blower, first, ensure that the fuel shut-off valve is in the “open” position. Then, prime the carburetor by pressing the primer bulb a few times.

Next, open the throttle and pull the starter cord until the engine starts. Once the engine runs, slowly release the throttle until it reaches the desired speed.

The PB-2520 is equipped with a cruise control feature. It allows you to maintain a constant speed without holding down the throttle trigger.

To use cruise control, squeeze and release the throttle trigger until it locks in place.

The blower will continue to run at that speed until you release the trigger or turn off the engine.

PB-250LN

Starting procedure is the same for all ECHO backpack blowers. Before you start the engine, strap the blower to your back.

Then, make sure you are in an open area with good ventilation. It is also essential to check that all controls are in the correct starting position.

Assuming you have all the necessary tools and equipment, here’s how to start your ECHO blower PB-250LN:

Fill the tank with fresh, unleaded gasoline.
Open the air filter cover and make sure the air filter is clean.
Set the choke to the “full” position.

Prime the carburetor by depressing the primer bulb six to eight times.
Place the engine switch in the “on” position.
Depress and release the throttle trigger to half speed.

Pull the starter cord using a smooth, steady motion until the engine starts.
Once the engine runs, set the choke to the “run” position and increase the throttle speed as needed.

PB-500T

The ECHO PB-500T is a fantastic way to clean your yard efficiently, removing leaves, trash, and other stuff. Here are the simple steps to get started:

Ensure the ECHO blower is adequately fueled with clean, fresh gas. ECHO engines are designed to run on unleaded gasoline with a minimum octane rating of 87.
Inspect the air filter to ensure it is clean and debris-free. A clogged air filter will reduce engine performance and damage the engine over time.
Depress the primer bulb three times, then pull the starter cord until the engine fires up.

Adjust the throttle lever to the desired speed. Then hold down the trigger on the handle to begin blowing leaves and debris. Release the trigger to stop blowing.
When you are finished using the ECHO blower, shut off the engine and allow it to cool before storing it. Be sure to empty any remaining fuel from the tank before storing it for extended periods. These simple steps will help you get years of trouble-free use from your ECHO blower PB-500T.

PB-580H

ECHO Blower PB-580H is ideal for tough blowing jobs like dry leaves, lawn debris, and heavy snow.

It features a 58.2 cc professional-grade 2-stroke engine, ECHO’s Tube Throttle with Posi-loc pipes, and Vortex gasoline engine technology.

It has an air volume of 510 CFM and an air speed of 215 MPH.

The ECHO Blower PB-580H also includes a padded backrest and shoulder straps for operator comfort.

Here are the instructions on how to start your ECHO Blower PB-580H:

Fill the gas tank with fresh, clean unleaded gasoline. Do not use blends of gasoline and oil (such as “STA-BIL” or “Heet”). Use of these blended fuels will void your ECHO warranty.
To reduce the chances of engine flooding, do not operate the blower at full throttle while starting the engine. Instead, start the engine at 1/3 throttle or less.

Move the choke lever to the “CHOKE” position.
If it is cold (below freezing), move the throttle lever to the “FAST” position. If it is warm (above freezing), move the throttle lever to the “SLOW” position.
Firmly depress the primer bulb six times.

While depressing the primer bulb, pull the starter cord with a smooth, steady motion until the engine starts.
Once the engine has started, move the choke lever to the “RUN” position and increase the throttle speed as needed.
If the engine stalls or fails to start, repeat steps 3 through 7. Do not continue trying to start the engine if it does not start within 15 seconds. Wait for 30 seconds before trying again. Flooding can occur if you try to start the engine too often without waiting for it to dry out first.