If you own a Babylock jazz 2, you have probably encountered some problems. This sewing machine is known for being high-quality but also prone to common issues.
This blog post will outline the most common Babylock jazz 2 problems and how to fix them.
Hopefully, this information will help you keep your machine in good working order!
How To Clean And Oil Your Machine
Cleaning Your Machine
It’s essential to keep your machine clean to run smoothly and efficiently. Here’s how to clean your Babylock jazz 2:
Unplug the machine and remove any thread or fabric from the bedplate.
Use a soft cloth to dust off the outside of the machine.
Open up the bobbin case and remove any lint or debris.
Use a can of compressed air to blow out any dust from around the gears and pulleys.
Wipe down the bedplate with a damp cloth.
Oil the machine according to the manufacturer’s instructions.
Oiling Your Machine
Your machine needs to be oiled regularly to function correctly. Here’s how to oil your Babylock jazz 2:
Unplug the machine and remove any thread or fabric from the bedplate.
Locate the oiling points on the machine and apply a few drops of sewing machine oil.
Use a soft cloth to wipe away any excess oil.
Plug the machine back in and test it to ensure it’s running smoothly.
If you don’t oil your machine regularly, it can start to make loud noises, skip stitches, or even break down completely.
Common Problems
Little Height Right Of The Needle For Comfortable Working
If you find that the height right of the needle is too low, you can adjust it. First, remove the screw on the side of the machine that holds the needle in place.
Next, slide the needle holder up or down to the desired height and replace the screw. Test your work to make sure that the height is now comfortable for you.
The Feed Dogs Are Not Feeding The Fabric
One of the most common Babylock jazz 2 problems is that the feed dogs are not feeding the fabric.
It can be a very frustrating issue, but luckily it is relatively easy to fix. First, check to ensure the feed dogs are in the correct position.
They should be down and level with the needle plate. If they are not, adjust them accordingly.
Next, check your stitch length. It should be set to at least 3 mm.
If it is not, increase it until the problem is resolved. Finally, ensure the presser foot is correctly positioned over the fabric.
If not, raise or lower it until it is in the correct position.
The Machine Is Skipping Stitches
If you find that your machine is skipping stitches, there are a few possible causes. First, check to ensure the needle is inserted correctly and tightened.
Next, check your thread tension. It should be set to the middle position. If it is not, adjust it until the problem is resolved.
Finally, ensure the presser foot is correctly positioned over the fabric. If not, raise or lower it until it is in the correct position.
The Machine Is Making Loud Noises
If your machine is making loud noises, there are a few possible causes. First, check to make sure that nothing is obstructing the sewing needle.
Next, check to see if the machine is adequately lubricated. If it is not, apply a small amount of sewing machine oil to the moving parts.
Finally, ensure the presser foot is correctly positioned over the fabric. If not, raise or lower it until it is in the correct position.
The Machine Is Not Picking Up The Bobbin Thread
Another common problem with the Babylock jazz 2 is that it doesn’t pick up the bobbin thread.
It can be caused by several factors, such as incorrect tension on the upper thread or a problem with the needle.
Try some of the following solutions:
Check that the upper thread tension is correct.
Make sure the needle is inserted correctly and is the correct size for your project.
If the problem persists, you may need to have the machine serviced by a professional.
Throat Space To Small
One of the common problems that many people have with their Babylock jazz 2 is that the throat space is too small.
It can make it challenging to sew more significant projects, such as quilts. The best way to fix this problem is to purchase an extension table.
It will give you more space to work with and make sewing larger projects much more accessible.
May Be A Bit On The Heavy Side
The Babylock Jazz 2 is a high-quality machine, but it can be a bit on the heavy side.
Moving around can make it challenging, especially if you need to take it to a sewing class or workshop.
One way to combat this is to purchase a carrying case for your machine. It will make it easier to transport and keep your machine safe.
Only 28 Stitch Patterns Built-In
The Babylock jazz 2 only has 28 stitch patterns built in, which may not be enough for some people.
You can purchase a stitch pattern book or download a stitch pattern collection online if you need more variety.
It will give you access to hundreds of different stitch patterns you can use with your machine.
Shake A Lot When Running
Another common problem with the Babylock jazz 2 is that it shakes a lot when running.
It can be caused by various factors, such as a faulty motor or incorrect tension on the thread. If your machine is shaking a lot, try some of the following solutions:
Check that all screws and bolts are tightened properly.
Make sure the bobbin is threaded correctly.
Clean out any lint or dust from around the gears and pulleys.
If the problem persists, you may need to have the machine serviced by a professional.
Foot Pedal Malfunctioning
If the foot pedal on your Babylock jazz 2 is not working correctly, it could be a problem with the pedal itself or the machine’s wiring.
Try some of the following solutions:
Check that the pedal is plugged in correctly.
Make sure the machine is turned on.
If the problem persists, you may need to have the machine serviced by a professional.
Needle Breaking
If the needle on your Babylock jazz 2 is breaking, it could be due to several factors, such as incorrect tension on the upper thread or a problem with the needle.
Try some of the following solutions:
Check that the upper thread tension is correct.
Make sure the needle is inserted correctly and is the correct size for your project.
Clean out any lint or dust from around the gears and pulleys.
If the problem persists, you may need to have the machine serviced by a professional.
When To Call A Professional
Even if you’re taking good care of your machine, there may come a time when you need to call in a professional.
Here are some signs that it’s time to call a sewing machine repair person:
Your machine is making strange noises that you can’t identify.
Your machine isn’t sewing properly, and you’ve tried all the troubleshooting tips, but nothing is working.
You’re not comfortable performing essential maintenance on your machine.
Your machine is older, and parts are starting to wear out.
You suspect there is something wrong with the electrical components of your machine.
If you’re experiencing any of these problems, it’s best to call a professional for help.
Trying to fix the problem yourself could worsen, and you don’t want to risk damaging your machine beyond repair.
Conclusion
The Babylock Jazz 2 is a high-quality sewing machine perfect for beginners and experienced sewers alike.
While it has minor drawbacks, such as being on the heavy side and only having 28 built-in stitch patterns, these are far outweighed by its many positive features.
If you’re looking for a versatile and user-friendly sewing machine, the Babylock Jazz 2 is an excellent choice.
