Table of Contents
If you’re into hunting, the need to get a reliable shooting engine should be on your mind.
You’ll want a lightweight shotgun that you can carry afield while going on shooting rounds all day.
The “Franchi Affinity 3” is a game-changer in this category. This inertia-driven shotgun is attractive and points well.
At its price point, it’s one of the finest shotguns to own.
Despite its desirable features, you can encounter a few common problems while handling the Franchi Affinity 3.
So, we will dive deep into these problems and how best you can address them.
Common Problems With Franchi Affinity 3
If you have experience with shotguns, you’ll understand that encountering problems is inevitable. No matter how good a gun is, it has its downsides.
So, a description of these problems will help you efficiently manage the situation when it happens.
Here’s a list of common problems that can affect the functionality of Franchi Affinity 3:
- Stress in Unloading the Magazine
- Scuffs in Shotgun Coverage
- Loosely Fixed Fiber Optic Sight
- Shotgun Shooting Issues
Stress In Unloading The Magazine
When stuffing cartridges into the magazine of a Franchi Affinity 3, you have to put in a lot of effort.
Unfortunately, much more effort is required when trying to unload the magazine.
It is a common problem with most Franchi Affinity 3 shotguns. The stress experienced when unloading the magazine is caused by the black carrier in the magazine.
It holds back the round in the magazine, causing it to get stuck in the magazine.
When this happens, you will find it challenging to extract the rounds in the magazine.
If you manage to rack the bolt to eject the first round, there’s a high tendency the next round will not pick up.
It is necessary to unload your Franchi Affinity 3 when not in use. It is a vital safety precaution.
Causes Of Stress In Unloading The Magazine
- Stiff spring on the shell stop
- Difficulty in handling the bolt release button
- Fingers getting stuck in the loading chamber
Solution
The loaded rounds in the chamber of the Franchi Affinity 3 you can easily extract.
To unload the magazine of your Franchi Affinity 3, you have to push the bolt release button carefully.
You will then push in the black carrier and stick your finger into the bottom of the receiver.
At this point, you will need to push in the shell latch and remove the rounds one after the other.
Note: You have to ensure the safety catch is ON before unloading your Franchi Affinity 3.
Scuffs In Shotgun Coverage
The cover of the Franchi Affinity 3 is meant to be scratch-resistant, but it can have nuances after a couple of shooting rounds.
You’ll find scuffs all over the gun cover if you are into hunting.
While this is not a shotgun safety-threatening problem, it still appears as an issue you don’t want to experience.
It can get annoying to find that your newly acquired gun has scuffs all over.
At first glance, one can easily spot these nuances in the coverage.
The coating of this shotgun is so brittle that picking the coverage with your fingers can even cause it to have unwanted scuffs.
So, the coating of the Franchi Affinity 3 can quickly wear off after a couple of months.
Causes Of Scuffs In Shotgun Coverage
- Scratching the gun on hard surfaces
- Dragging the gun through hunting tracks
- Driving the gun in the trunk of vehicles or boats
Solution
The coverage of the Franchi Affinity 3 can quickly feel the effect of scrapes and scratches.
So, to avoid having scuffs all over the coverage, you should exercise caution when moving it around.
Also, ensure you keep it in a gun case or bag when not in use. It will keep the cover clean.
Loosely Fixed Fiber Optic Sight
The Franchi Affinity 3 has a practical aiming front sight with two impressive colored aiming aids.
The two-colored aiming aids shine bright in the twilight. It appears like a small red dot sight.
While this offers good illumination, there’s a cause for concern because it’s not adequately secured.
This device is fixed on the front barrel, but it can quickly fly out when shooting. It is because it is not firmly fixed on the gun barrel.
It’s a helpful device but one that needs to be fixed.
Hence, this is a common problem to address when you have a Franchi Affinity 3 shotgun.
Causes Of Loosely Fixed Fiber Optic Sight
- Fragile translucent foresight
- Aiming front sight spinning on one bolt
- Presence of a U-shaped fastener around the latch
Solution
If you have a loosely fixed fiber optic sight on your Franchi Affinity 3, you need to find a way to fix it. Failure in doing so can lead to unwanted injuries while shooting.
To fix this problem, you will need to take the gun to a professional gunsmith to help fix the aiming front sight with two bolts.
Shotgun Shooting Issues
The Franchi Affinity 3 comes with a 28″ barrel, making it shorter in barrel length than other shotguns.
It can still work as a long receiver on a sighting plane despite the barrel length.
The feel is good overall when it comes to hand placement on the Franchi Affinity 3 shotgun.
It can be a bit front-heavy, but you will get used to it after a few rounds of shooting and hunting.
Shooting is enjoyable with this shotgun if there’s no limitation. Thanks to its unique features.
The Franchi Affinity 3 might still experience shooting issues with all these features in place.
Here’s why; the gun accelerates rearwards when firing, thereby delaying the recoil cycle on shots.
There might be no second shot when the gun fires the first time, even with two cartridge raids fixed.
It is a severe shooting issue caused by several factors beyond the shooting style.
Causes Of Shotgun Shooting Issues
- Recoil cycle issues
- Bumping the action open
- Trouble pulling the trigger
Solution
You will need to take the Franchi Affinity 3 to a gun factory for assessment.
Once the shooting issues get fixed, you will need to practice intense shooting a couple of times to get it rolling.
While the loading of shells into this gun can be tough on the thumb, you will master the act after several magazine loading.
Once that is in place, you’re good to start shooting and hunting with it.
Conclusion
Franchi Affinity 3 shotgun is well-balanced, and the grip is excellent. The camo patterns on the cover blend in with the surroundings to offer proper camouflage.
You will feel comfortable handling this shotgun on your shooting or hunting trips. It has long recoil action that needs getting used to it.
Aside from that, it is a perfect shotgun for waterfowl hunters that go hunting frequently.
Furthermore, a 3″ chambered semi-automatic shotgun offers high shooting performance.
Knowing the everyday problems of Franchi Affinity 3 will help you get the best out of the shotgun.
