Girsan MC312 – Known Problems

Many people want to use a shotgun for home protection or training purposes. However, they cannot afford a semi-automatic shotgun because of the high price.

Newly revealed by the European American Armory Corporation is the Girsan MC312 shotgun.

For the first time in Girsan history, MC 312 appears to be the company’s foray into the shotgun market.

You can’t go wrong with the Girsan MC312 12 GA, 28″ inertia S/A shotgun. The Girsan MC312 shotgun, as expected, handled the abuse like a champ.

However, the gun has common issues which we will be discussing.

Common Problems Of Girsan MC312

Failed Lock After Last Fire

Loading the magazine at random with various shells of varying lengths and powers resulted in excellent reliability.

However, the standard issue with the Girsan MC312 is that the bolt occasionally fails to lock open after you fire the last shot.

The bolt moves as if it were on lubricated ball bearings, and it’s exact. The ejector is the only item one can fault.

For most people that have tested this gun, this has always been their complaint.

It is vital to pay more attention to this problem because it is one of the features that has discouraged many from using guns.

Squib Fire

Squib fire is another common issue with the Girsan MC312 rampant among reviews.

Because of the gun’s insufficient force, the bullet doesn’t exit the barrel when it’s shot, causing a “squib fire.”

Due to this, the projectile becomes a hindrance in the barrel. You must remove the obstruction before another round is fired.

If not, you could suffer catastrophic damage.

How To Identify A Squib

A squib load may be difficult to notice if you are in a fast-paced or high-adrenaline shooting situation. Squibs can appear in a variety of ways:

• A squib fire can be identified by its sound, a quiet “pop” rather than the regular loud report. This sound can be challenging to hear on a noisy gun range or during busy drills, especially if the shooter wears suitable ear protection.
• You can also detect a squib fire in your Girsan MC312 by the shooter’s experience of lighter-than-normal recoil. Check for a squib quickly if a shot feels light compared to your other shots.
• Also, there’s often a little cloud of smoke from squib shots. The gun’s barrel or the action could be responsible for this cloud of smoke.

A Squib Fire: What To Do If It Occurs?

Do not be perplexed when using your Girsan MC312 and you experience squib fire. You need to make sure your weapon pointing is downrange at all times.

Shooters should be aware that not all squib fire is created equal. It may be a hangfire.

Allow at least a couple of seconds to pass before aiming your firearm in a safe direction. Also, lower the magazine before locking the upper receiver into place.

Make sure there is a live round in the chamber. Use your fingers, pocket knives, or other instruments to remove the jammed case.

Disassemble your weapon once the chamber has been cleared.

It’s essential to keep the muzzle facing away from you. It could necessitate the use of a flashlight down the barrel.

You can repair and reload your weapon after ensuring there isn’t a round in the chamber.

You may be able to use a dowel or metal cleaning rod to drive the bullet through the muzzle. You need to follow the barrel’s rifling to avoid damage.

You may require the assistance of a skilled gunsmith, depending on how deeply the bullet is embedded.

Misfires

Another grieving issue with the Girsan MC312 is misfiring. Misfiring is often caused when there is an issue with the Girsan MC312 firing mechanism.

Also, misfire is in the same conditions as a more significant hangfire. Even though a misfire isn’t harmful in and of itself, many shooters mistake it for a dangerous hangfire.

What To Do In The Event Of A Misfire

Whenever you have a misfire, handle it as if it were a full-blown fire.

If the powder in the cartridge takes longer than expected to ignite, make sure your weapon has its muzzle pointing down range for at least one full minute.

You should check the barrel for obstructions after at least 60 seconds have passed and no discharges have occurred.

If the weapon is precise, look for corrosion, contamination, or a light primer indentation in the responsible cartridge’s chamber.

Using a particular brand or kind of ammunition may improve the performance of your pistol.

Make a move to a more reliable ammo type if you’re having problems with a specific type of ammunition.

Feed Problems

A cartridge that won’t feed is just one that hasn’t been adequately seated in a chamber. Because Girsan MC312 is semi-automatic, this gun faces difficulty with feeding.

What Causes Feed Problems?

• Destroyed Magazine.
•  Spring Strength in the Magazine is Inadequate.
•  There may be accumulated dirt or grease in the chamber and malfunctioning cartridges.

What To Do When This Occurs?

If you’re having this problem, remove the magazine and empty the chamber.

The gun may need to be cleaned up before using it again, but you can reload and give it another go.

If the gun fails to feed again, and you have established that it has been thoroughly cleaned and lubricated, there may be a third possible explanation for the problem.

When the shooter gets in the way of the slide as it moves forward, the recoil spring’s power to seat the cartridge is reduced.

By being aware of this, you may be able to prevent feeding failures. What you’re doing is referred to as “surfing the wave.”

Other Common Problems

• A malfunction can occur in the Girsan MC312 when the last round in the magazine is fired. Look for a faulty magazine or a short recoil spring.
• When the bolt catch is engaged, the bolt fails to lock in the backward position. Ensure that the bolt catch is working correctly; turn it into the unit armorer.
• A semi-automatic firearm can fire two or more bullets when the trigger is pressed while holding the SEMI selector lever. Disconnectors and other parts may have worn out and are no longer functioning correctly. Repair or replace any trigger group pieces that need to be done by the armorer.
• The trigger does not pull or return after release when the selector is in the firing position. There are two possibilities: the hammer spring is broken, or the trigger pin is out of place. Return to the armorer for replacement or repair.
• Failed to latch onto the magazine properly. Adjust or replace the catch with the help of an armorer. Ensure the magazine and magazine catch are in good condition before using them.

Conclusion

Girsan MC312 is a semi-acoustic gun that is less expensive. Although the MC312 has various merit, it is essential to understand the common issue with this gun.

Above in this article, we have listed the common problems you may likely face.

Also, we have provided some solutions you can take whenever you experience any of these issues.

However, do not forget to always refer to the manual’s guide when using the MC312.