Table of Contents
If you own a defensive handgun, you probably want the best out of it. It involves getting the best gears to make the firearm function at maximum capacity.
An excellent example of such gears is the “Hex Wasp” optics. It features durable aluminum construction and natural glass lenses.
This electronic optics device is specially designed to provide superior optical support for firearms.
As good as the Hex Wasp optics look, it has problems limiting its functionality.
Hence, we’ve decided to break down some of the common problems with the Hex Wasp optics.
Common Problems With Hex Wasp Optics
Once you mount the Hex Wasp red dot optic on your handgun, be it the Glock 40 or Hellcat RDP, you want to ensure no problems with it.
So, you should get familiar with the common problems now. That way, you can quickly address any issues related to the Hex Wasp optics.
Here are some common problems that can affect the performance of the Hex Wasp:
- Damaged Battery Issues
- Wasp Not Holding Zero
- Inappropriate Lighting Condition Adjustments
- Hex Wasp Coming Off the Firearm
Damaged Battery Issues
A common problem with the Hex Wasp is a dead battery. This optics gear uses a single bottom-loading CR2032 battery to power the self-adjusting dot.
The expected battery life is 65,000 hours.
If you check firearms maintenance forums, you will notice that many are experiencing this issue. You could get a new handgun and mount a hex wasp on it.
Then the battery will die after a few months of use. It can be very frustrating, as it will leave you with a malfunctioning Hex Wasp.
You’ll start experiencing dimming issues and a red dot not coming on with the battery connected.
Causes Of Damaged Battery Issues
- Quick battery discharge
- Faulty hex wasp optic unit
- Driving the optics at a high level
Solution
If you are experiencing damaged battery issues after a few months of use, you will have to contact Springfield customer support.
It could be a result of manufacturers’ defects.
The battery has a 2-year warranty, so you’ll be entitled to a replacement. Getting a new battery is an immediate solution to this issue.
Slot it in once you have it, and the dot sight will start working.
Hex Wasp Not Holding Zero
The Hex Wasp not holding zero is a common problem many users have experienced.
This problem can be caused by several factors like issues with your grip or wasp being off.
Mainly, the root cause of the wasp not holding zero is due to the wasp not being mounted securely.
Once the screws are loose, it will affect the stability of the Hex Wasp.
You want your Hex Wasp to hold zero. If it’s not holding zero, then there’s a problem.
So, it is necessary to check if your Hex Wasp is well mounted on your defensive handgun.
Causes Of Hex Wasp Not Holding Zero
- Red dot drifting endlessly
- Loose screws on the mount
- Wasp not mounted securely
Solution
When faced with this kind of problem, you should ensure to torque the screws down to the actual specification.
Also, you can apply some blue Loctite thread locker to prevent the screws from loosening during gun vibration.
It will help secure the wasp fastener to prevent this problem.
Make sure your firearm is unloaded when zeroing the wasp. It is a basic rule of firearm safety.
Note: If this doesn’t solve the issue, do not hesitate to reach out to Springfield Armory.
Inappropriate Lighting Condition Adjustments
The lack of dimmable controls in a Hex Wasp is more of a product limitation than a problem.
The real problem lies in that you can’t adjust the lighting condition in different ambiances.
The Hex Wasp automatically adjusts to ambient lighting conditions, but it might not be what you want.
There are situations whereby the red dot visibility on the viewing screen doesn’t give off the right MOA ratings.
The perfect MOA ratings on a red dot are between 3.5 MOA to 5.0 MOA.
So, whether you’re into fast shooting, target shooting, or precision shooting, you won’t have the freedom to adjust the lighting condition manually.
This problem can affect your pick-up and fast group shooting. In addition, not being able to adjust brightness is a big issue on Hex Wasp.
Causes Of Inappropriate Lighting Condition Adjustments
- No ON/OFF switch
- Lack of dimmable controls
- Positioning of the light sensor
- No brightness adjustment settings
Solution
The best solution is to replace your Wasp optic with the Dragonfly optic.
The latter offers additional control to adjust your optic’s brightness and lighting settings automatically.
If you control the adjustments, the lighting will be more appropriate for your needs.
Hex Wasp Coming Off The Firearm
It is common to have the Hex Wasp optic come off a firearm. Most times, optics are pre-installed on firearms from the factory.
So, you will expect them to hold out for as long as you use them.
If you happen to be a shooter that likes going on several rounds of shooting, there’s a tendency for the Hex Wasp optic on your handgun to fly out after a few rounds of shooting.
It is a hazardous problem as it can injure you or anyone around you.
Therefore, this is a significant problem if you have Hex Wasp installed on your pistol or defensive handgun.
It is necessary to inspect the optic placement on your firearm before shooting visually.
A little bit of wiggling will help you determine if the optic will fly out or not while shooting.
Sincerely, this is not a problem to take lightly. You have to address it before it causes an accident.
Causes Of Hex Wasp Coming Off The Firearm
- Wrong mounting position
- Loose screws on the mount
- Optic manufacturer’s defect
Solution
Factory installation of gears and pieces of firearm equipment can be faulty. So, you don’t have to trust it completely.
When you get your firearm with a Hex Wasp optic installed, you might want to re-install them yourself to ensure it is secure. Do not do this if you lack the expertise.
Like the solution, when your hex wasp is not holding zero, you must ensure your Hex Wasp optic is securely mounted atop your firearm.
It is achievable by applying blue Loctite to secure the screws holding the optic. This process should come after you’ve torqued the screws in.
If you can’t do this, ensure you send the firearm to a professional for proper optic installation.
Conclusion
Springfield Armory launched the Hex Wasp to add a new dimension to the optics space. So, you’ll expect this gear to deliver quality optical support for your firearm.
In a situation where it doesn’t, you can tell it has to do with some common problems that affect optical gears atop firearms.
For this reason, it is essential to look into any problem that might occur with the hex wasp.
Not just that, you also have to figure out the best ways to solve the problems. We hope this helps.
