There’s no denying that the John Deere x350 is one of the most popular lawn mowers on the market.
The John Deere X350 comes with various mowing decks, so you may select the one that best suits your needs.
However, as good as this lawn mower is, there are still some problems one might encounter while using it.
Also, recently some customers are reporting recurring issues in various forms.
Not to worry, in the following paragraphs, we will discuss the most common problems with the John Deere x350 in detail.
Excessive Fuel Consumption
Nobody will be satisfied if they use more fuel than the typical amount to operate their lawn mower.
Simply taking into account the cost enables one to consider additional factors readily.
Many individuals are irritated because their John Deere x350 consumes excessive fuel. A common complaint among owners of this model.
In all honesty, this ought to be something that causes you some degree of concern.
It is common practice to blame the John Deere X350 lawn mower’s higher-than-average fuel consumption on the throttle and carburetor of the lawn mower.
You might remedy the issue in this situation by ensuring that the carburetor is calibrated appropriately.
You can also seek the advice of a mechanical engineer if the problem becomes unbearable.
Fuel Pump Issues
A sensor is built into the fuel pump of a John Deere x350 lawn mower. This sensor helps control the flow of fuel into the carburetor.
If the sensor isn’t working right, the fuel pump won’t send enough fuel to the engine.
In this sense, it allows it to run, resulting in the engine spontaneously turning off or backfiring.
You won’t need electronic instruments to check the pump’s sensor, which only takes a few minutes. So you’ll find out quickly if your pump needs to be replaced.
If it is difficult to start the vehicle or if it won’t start at all, it is conceivable that the fuel pump in your vehicle is malfunctioning or clogged.
Some people have reported that after turning the key in the ignition to allow the engine to crank, the vehicle still didn’t start.
The problem is associated with fuel not reaching the engine.
Or, if the engine turns over but it takes more than the usual number of turns to do so, the fuel pump may be the source of the problem.
Excessive Vibration
Concerns have been voiced by a few different persons regarding the exceptionally high vibration levels produced by John Deere X350 lawn mowers.
You should turn off the engine when you notice that your John Deere x350 lawn mower is shaking uncontrollably.
When you engage it, there is a possibility that the driving system for the cutting blades will not work correctly.
The mower blade may be broken, but it’s also possible that it’s just not balanced well.
Incorrectly sharpening or a blade that is damaged are two probable causes of a blade being out of balance.
It is also possible that the blade has been mishandled or misused.
You can test the blade’s balance by removing it and hanging it from a wall with a nail inserted in the middle hole.
Steering Issue
As time goes on, the steering of your John Deere lawn mower could become more challenging to handle.
There is a possibility that this is the result of a bolt that has become dislodged or bushings that have become worn down over time.
Both of these things restrict the essential gear engagement for direct steering.
There have been several conversations, and some people have complained that they cannot turn the steering of their x350 as they had anticipated.
If something like this happens to you, you must get it checked out by a mechanic as soon as possible.
In most cases, the problem can be found in the smaller gear sectors.
The Battery Charging Issues
When trying to work on your lawn, a malfunction in your X350 can be one of the most annoying things—repairing something as critical as the battery requires a significant investment in time and money.
If you’ve got a battery-powered John Deere to implement, you’re in luck! Even so, issues do arise from time to time.
There’s a typical problem with the charging system’s cables falling off and causing them to malfunction or not charge.
Try tightening the wires connecting to the charging system if you’re having trouble, as this is the most typical solution to battery charging issues.
Alternator issues are another potential source of the problem.
The alternator of the John Deere x350 is the component that is in charge of transferring electricity from the battery to the other components of the machine.
Because power will leak into other locations too early if the alternator is faulty, you cannot expect the battery to charge even if you replace the alternator.
Engine Emitting Black Smoke
One could believe that a cloud of black smoke from an x350 engine is a sign that the vehicle is getting on in years.
However, the issue still manifests itself in newly purchased machines as well.
There could be white or blue smoke from a new x350 lawn mower as it gets used to its new surroundings.
While the engine is being broken in, the piston rings are seated, and any residual oil that may have coated the parts during construction is burned off.
However, John Deere and Company suggest that a new engine be worked hard for at least five hours before it is used for the first time, although the break-in phase may go for as long as fifty hours, depending on how the engine is used.
Overheating
The John Deere x350 engine frequently experiences issues related to overheating.
When the engine of the X350 reaches a temperature where it is unsafe to operate, it will either stop running immediately or refuse to restart after being turned off.
Long-term use of an overheated mower can lead to internal engine component damage.
Shut down the engine when it becomes too hot and fixes the problem before trying to rerun it. However, the problem of overheating can also be caused by the user.
The engine overheats if there is insufficient oil to disperse heat and minimize friction. Overheating can also occur if the engine has too much oil.
Long periods spent driving the John Deere x350 through heavy, damp grass are hard on the engine. The motor may overheat as a result of this additional stress.
Conclusions
It considers the common problems of the John Deere x350 as highlighted above. It is advisable to make the maintenance of the lawn mower a priority.
Run a periodic check on the engine to know its state. If possible, run the checks every time before the operation.
It will keep you from any form of disappointment you may face from its breakdown.
However, if you are experiencing any common problems with the x350 lawn mower as listed here.
The best option is to invite an engineer to look into it to find a lasting solution.
