Table of Contents
Wrapping fascia with aluminum might sound a little contradictory. After all, aluminum is a great conductor of heat that can also reach high temperatures quickly.
On the other hand, fascia is the wooden material that covers the eaves of a house, and its primary purpose is to be decorative and add aesthetic worth to your home. It would seem there is little to no sense in combining the two materials.
However, what if we say there are benefits to wrapping fascia with aluminum. Read the article to know:
Is it a good idea to wrap fascia boards with aluminum? How to wrap fascia boards in aluminum?
Is It a Good Idea To Wrap One’s Fascia With Aluminum?
It’s hard to deny that aluminum makes a beautiful accent to any home. People often ask whether or not aluminum can cover fascia. After all, metal is metal, and wood is wood, right?
That’s not entirely true. If you are building a new home or remodeling your current one, there are some compelling reasons to consider combining the two materials.
Protection From Harmful UV Rays
The aluminum fascia wrap is a lightweight, durable, and waterproof material. It’s made to protect the wood from the harmful effects of UV rays.
Plastics, especially polyethylene, absorb ultraviolet (UV) light and give off infrared (IR) radiation. Ultraviolet radiation causes photodegradation of plastics, and IR radiation causes heat generation.
Generally speaking, almost all types of plastics, including polyethylene, are unstable when exposed to light. Aluminum, on the other hand, neither absorbs UV or IR radiation nor breaks down.
Wrapping fascia with aluminum will not only save your wood fascia from the detrimental effects of the sun’s rays but will also help keep your wood from warping and cracking.
Protection From Wind-Driven Rain
Wood fascia is also more prone to water damage. Aluminum is both windproof and waterproof.
Wrapping fascia with aluminum creates a barrier between the roof and the rain, drastically reducing the amount of water that enters the house, and flooding the area below.
Therefore, people wrap their fascia with aluminum to prevent water from dripping off the roof and entering the house.
Saves Painting Money
Aluminum is easy to work with and cheaply. That is the main reason for its popularity as a fascia wrap. If you wrap fascia with aluminum, you probably won’t need to spend your money on painting your fascia.
Aluminum fascia is also a great way to cover up some clogged drains. It can also be used to transform the look of a boring wall.
Wrapping fascia boards with aluminum is inexpensive. It adds very little to the expense, but it does add a lot to the curb appeal.
How to Wrap Fascia Boards with Aluminum?
Wrapping fascia with aluminum is a common practice used to improve the visual appeal of homes and protect the wood. Aluminum fascia wrap is easy to install.
The fascia wrap comes in several different styles, and each of them is designed to fit a particular roof.
Depending on the wrap style, the fascia wrap is fastened to the roof by staples or rivets and is installed over the existing roof.
Follow these simple steps if you want to wrap your fascia boards with aluminum:
- Put the fascia board, with the clip facing down, on a flat, firm surface.
- Cut a piece of the aluminum trim coil about 1.5 times the width and three times the length of the fascia board.
- Lay the aluminum foil along with the board, with one end flush against the board and a tab sticking out about 10-12 inches.
- Fold the tab back over itself.
- Align the tabs and trim and fold over the ends.
- Fold-down the excess aluminum.
- Fold the end of the fascia board back over the aluminum, overlapping it slightly.
- Apply tape (optional, you can use screws as well. We will discuss this down below in detail)
- Apply caulk over the tape (this step is only for tape use. However, skip this step if you’re using screws).
- Apply a bead of silicone caulk along the edge where the fascia joins the wall for the final step.
Things to Consider When Purchasing Aluminum Sheet to Wrap Fascia
You have to be careful when purchasing aluminum sheets. With some brands or types, you may not have the results you are hoping for.
When you want to wrap fascia boards with aluminum, there are two types of aluminum sheets that you can choose from – aluminum sheets and aluminum angle.
The main difference between an aluminum sheet and an aluminum angle is in the thickness.
An aluminum sheet’s thickness is not much bigger than a piece of paper, which means you can use it for various household items.
An aluminum angle has thicker sheets than aluminum sheets, so they are usually used to craft furniture.
Using aluminum sheets for exterior siding is an excellent idea because these sheets are more durable than the aluminum angle.
The process of installation is a lot easier, and it costs a lot less. The sheets come in specific pre-made sizes, while the angle comes in standard sizes to be cut down to size.
Recommended by us:
The Eagle 1 Aluminum trim coil can be used for many projects.
It could be used for residential and light commercial fascia covers and trims.
The Eagle 1 Aluminum trim coil could be used for trim as well. If a few simple bends were added to the design of the trim it would make it much more substantial.
However, if you’re planning to order custom-made Aluminum fascia, that’s great too as well. But, keep in mind that custom-made aluminum fascia can be a little more expensive than aluminum sheet wraps.
Fascia wrapped with aluminum falls under the category of something that costs very little but makes a big difference.
Invest once, invest right, and never look back—no worries about wood rotting under the aluminum – no scratches or dents.
Things to Consider When Fastening Aluminum Fascia to the Studs and the Wall
The sheet can be fastened to the fascia board using screws, aluminum tape, plastic tape, or a combination of any two.
The screws are driven right through the wall and the fascia board. This keeps the sheet from moving and also prevents it from tearing.
Screws are easiest, but they tend to leave tiny holes in the sheet. The aluminum tape will stick better to the sheet but looks both ugly and unprofessional.
The Bottom Line
You might want to consider wrapping the fascia of your building with aluminum. This is one of the best ways to put up the final touches on your building.
Aluminum fascia is strong, durable, and offers excellent reflective properties, which is why it’s an ideal option.
Not only is Aluminum fascia wrap windproof and waterproof, but it is also mildew resistant. With an aluminum satin finish, your wood fascia would also have an elegant and classy look.
In short, if you are looking to change your home without changing the whole aesthetic, aluminum fascia can help.