The 10mm was designed as military ammunition to avoid over-penetration of enemy body armor.
Therefore, the version of this cartridge designed for military use is called the Delta Elite.
This cartridge boasts a high degree of lethality and a huge amount of stopping power. It has gained immense popularity due to its extreme firepower and its utilization in various types of firearms.
It’s a great choice for a defensive handgun, but there are a few things you should be aware of before you make your purchase.
Firing Pin Breakage
One common issue that users experience with the Colt Delta Elite 10mm is firing pin breakage.
This can occur when the firing pin fails to retract after the round is fired, leading to repeated strikes on the primer and eventual breakage.
The good news is that this issue is relatively easy to fix. Delta Elite 10mm owners just need to send their pistol in for a repair, and Colt will replace the broken firing pin free of charge.
Excessive Recoil
The Colt Delta Elite 10mm has a bit more recoil than other handguns in its class. This can make it difficult to shoot accurately for some people.
There are a few things you can do to help mitigate the recoil.
First, try using a shooting grip that helps you control the gun better.
Second, make sure you’re using the proper ammunition for your gun. Heavier rounds will have more recoil than lighter rounds.
Finally, take your time when shooting and make sure to squeeze the trigger smoothly.
Magazine Issues
The Colt Delta Elite 10mm has a magazine capacity of 8 rounds. However, there have been reports of the magazine jamming and not being able to eject the rounds properly.
This can be a major issue, as it can prevent you from being able to fire the weapon when you need to.
There are a few things you can do to help prevent this from happening:
Make sure that the magazine is properly inserted into the weapon, and that the rounds are seated properly.
You should also make sure that the magazine is clean and free of dirt and debris. If it is not, you can clean it with a brush or a cleaning kit.
Jamming
This is a common problem with the Colt Delta Elite 10mm, and it can be frustrating when you’re trying to shoot your gun and it keeps jamming.
There are a few things that could be causing this issue, so let’s go over them one by one.
First, make sure that you’re using the correct ammunition. The Colt Delta Elite 10mm is a semi-automatic pistol that uses high-pressure ammunition, so make sure you’re using the right stuff. If you’re not sure, ask someone at your local gun store or do some research online.
Next, take a look at your recoil spring assembly. This is the part of your gun that helps to absorb the recoil from firing the gun, and if it’s not functioning properly, it can cause your gun to jam. You can clean this part of your gun with a Gun Scrubber or another type of cleaning solvent.
Finally, if you’ve done all of this and your Colt Delta Elite 10mm is still jamming, you may need to replace the firing pin assembly.
This is a more difficult fix, and you may need to take your gun to a gunsmith or qualified pistolsmith to have it done.
Failure to Eject
If you’re experiencing failure to eject with your Colt Delta Elite 10mm, there are a few things you can do to troubleshoot the issue.
First, check to see if the gun is dirty. A build-up of dirt and debris can cause problems with any firearm, so make sure to clean your Colt Delta Elite 10mm regularly.
If the gun is clean and you’re still having issues, take a look at the extractor. The extractor is responsible for pulling the spent casing out of the chamber, if it’s damaged or not properly tensioned, it could be causing the failure to eject.
To fix a damaged or improperly tensioned extractor, you’ll need to replace it with a new one. You can buy an aftermarket extractor or order one from Colt.
If you’re handy with a wrench, you can try adjusting the tension on the existing extractor. This is a bit of a delicate process, so if you’re not comfortable doing it yourself, I recommend taking the gun to a qualified gunsmith.
Accidental Discharge
Accidental discharge is one of the most serious problems that can occur with any gun, and the Colt Delta Elite 10mm is no exception.
The Colt Delta Elite 10mm has a powerful recoil, which can be a bit much for some shooters. This problem is exacerbated by the gun’s lightweight, which makes it more difficult to control.
This can be a major issue for new shooters, who may not be used to the recoil and end up feeling frustrated or overwhelmed. Experienced shooters may also find the recoil to be too much, especially if they’re carrying the gun for extended periods.
Another problem of the Colt Delta Elite 10mm is not properly cleaned and lubricated. A build-up of dirt, debris, and even just a small amount of corrosion can cause the firing pin to become stuck in the forward position.
When this happens, the only thing that’s keeping the gun from firing is the trigger itself. And if you have a hair trigger, or even just a very light trigger, it doesn’t take much for that to happen.
So, what’s the fix?
First and foremost, make sure you’re cleaning and lubricating your gun properly. A good rule of thumb is to clean it after every shooting session and lube it up at least once a week.
Beyond that, you might want to consider getting a trigger job done. This will usually involve getting a new spring installed, which will help take some of the tension off of the trigger itself.
Muzzle Rise
The Colt Delta Elite 10mm is a great handgun when it works properly. But, as with any firearm, it’s not immune to problems, one such problem is the muzzle rise.
Muzzle rise is when the barrel of the weapon rises after firing, which makes it more difficult to keep the gun on target for follow-up shots.
This is a particular problem with the Colt Delta Elite 10mm, because of its powerful round.
There are a few things you can do to help mitigate muzzle rise:
Use a heavier buffer spring
Use a muzzle brake or compensator
Shoot slower and aim more carefully.
Limited Aftermarket Support
The final problem on our list is the lack of aftermarket support for the Colt Delta Elite 10mm.
This may not be a problem for everyone, but it’s something to consider if you’re thinking about buying one.
There are a limited number of companies making parts and accessories for the Colt Delta Elite 10mm, which means that your options are going to be limited.
And if you do manage to find something, it’s likely going to be more expensive than it would be for other guns.
So, if you’re thinking about buying a Colt Delta Elite 10mm, just be aware that you might not be able to find everything you’re looking for in terms of aftermarket support.
Conclusion
All in all, the Colt Delta Elite 10mm is a great gun, but like all guns, it’s not perfect. With a little know-how, however, you can fix the most common issues and enjoy your gun for years to come.
