How To Identify Dan Wesson Models – Guide

Dan Wesson is a gun manufacturer producing several pistols, revolvers, and rifles.

Each model of Dan Wesson’s firearm is slightly different, so it can be helpful to know how to identify them.

Dan Wesson makes two types of revolvers: the Heritage series and the Valor series.

The Heritage series is their more traditional line of revolvers, while the Valor series is their more modern offerings.

Both lines have a variety of different barrel lengths and calibers available.

For example, the “Cobra” model is a small revolver designed for concealed carry. The “Pointman” is a larger revolver designed for competition shooting.

6 Steps To Identify Dan Wesson Models

There are many different models of Dan Wesson firearms, so it can be helpful to know how to identify them. Here is a guide on how to identify Dan Wesson models:

Identify The Model Name

Dan Wesson makes a variety of different revolver models. The first step is to identify the model name.

The model name is usually stamped on the left side of the barrel, near the frame.

For example, the “Cobra” is stamped as “COBRA.” Sometimes the model name will be stamped on the right side of the barrel.

If you cannot find the model name, look for the serial number.

The serial number will be on the bottom of the grip frame, under the left grip panel. The last four digits of the serial number will indicate the year of manufacture.

For example, a serial number ending in “1234” would indicate that the gun was manufactured in 2012.

Once you have located the model name and serial number, you can use them to identify the specific model.

Identify The Caliber

The Second Step Is To Identify The Caliber.

Dan Wesson introduced their first revolver in 1968, and since then, they have become a well-respected manufacturer of high-quality firearms.

One thing that sets Dan Wesson apart from other manufacturers is their use of interchangeable barrels.

It allows the user to change their weapon’s length and caliber easily.

As a result, Dan Wesson revolvers are available in a wide range of configurations. It makes them versatile tools for self-defense and target shooting.

The caliber is usually stamped on the right side of the barrel, near the frame. For example, the “Pointman” is stamped as “.45ACP”.

Deciphering the model number can be difficult, as some letters have multiple meanings. Below is a key to help identify the meaning of each letter in a model number:

• C – Combat (Target)
• S – Stainless Steel
• T – Titanium
• P – Polymer Frame
• U – Ultralight Frame
• L – Lightweight Frame (Alloy)
• X – ExposureCompensating Rear Sight
• R – Adjustable Rear Sight
• F – Fixed Rear Sight
• G – Gold Bead Front Sight

Identify The Grips

If you’re a fan of Dan Wesson firearms, you know that they come in various models. But how can you tell one model from another?

One way is to look at the grips. Dan Wesson usually includes unique grips that can help you identify the model.

For example, the “Cobra” has black rubber grips with a snake logo. Other models have wood or metal grips with different shapes and patterns.

By carefully examining the grips, you should be able to narrow down which model you’re looking at.

Of course, grips are just one way to identify a Dan Wesson firearm. If you’re unsure about the model, you can always consult an expert or look up the serial number.

With some research, you should be able to figure out which Dan Wesson model you’re dealing with.

Identify The Sights

The fourth step is to identify the sights. Dan Wesson firearms are easily identified by their unique sights.

For example, the “Pointman” model has adjustable target sights.

First, to identify the sights on a Dan Wesson firearm, take a close look at the front sight. If it is a screw-on type, it is most likely a “Pointman” model.

If the front sight is integral to the barrel, it is likely a “Classic” model.

Next, take a look at the rear sight. If it is adjustable, it is likely a “Pointman” or “CBOB” model.

If the rear sight is not adjustable, it is likely a “Classic” model.

Finally, check the cylinder release latch. It is likely a “Pointman” or “CBOB” model if it is located on the left side of the frame.

If the cylinder release latch is located on the right side of the frame, it is most likely a ” classic” model.

You can quickly and easily identify most Dan Wesson models by carefully identifying these characteristics.

Compare The Weight

The fifth step is to compare the weight. Dan Wesson revolvers come in various weights, depending on the model.

For example, the “Pointman” is a heavyweight gun, while the “Cobra” is a lightweight gun.

To determine the weight of a Dan Wesson revolver, pick it up and feel how heavy it is.

Dan Wesson revolvers are generally heavier than other brands because they are constructed with high-quality materials.

The weight can vary from model to model, but all Dan Wesson revolvers are built to last. If you are looking for a lightweight option, the “Cobra” is a good choice.

If you want a heavyweight revolver to bear years of wear and tear, the “Pointman” is a great option.

No matter your preference, you can be sure that a Dan Wesson revolver will provide you with reliable service.

Identify The Finish

The sixth step is to identify the finish. Dan Wesson firearms usually have a unique finish to help you identify the model.

For example, the “Cobra” has a brushed stainless steel finish. If you are unsure of the model, look at the grips.

Dan Wesson uses different grips for each model. For example, the “Cobra” has a checkered rubber grip with the “DW” logo in the center.

The “Bounty Hunter” has a wood grip with the initials “BH” on them. By identifying these features, you should determine which model of Dan Wesson firearm you have.

There you have it! A quick and easy guide to help you identify Dan Wesson models.

By following these simple steps, you should be able to figure out which model you’re dealing with.

So the next time you’re at a gun show, you’ll be able to quickly and easily identify Dan Wesson firearms.

Key Takeaways

• Dan Wesson revolvers are available in various configurations, sizes, models, and specifications. It makes them versatile tools for both self-defense and target shooting.
• The caliber is usually stamped on the right side of the barrel, near the frame.
• Deciphering the model number can be difficult, as some letters have multiple meanings.
• Dan Wesson usually includes unique grips that can help you identify the model.
• First, to identify the sights on a Dan Wesson firearm, take a close look at the front sight.
• Check the cylinder release latch. It is likely a “Pointman” or “CBOB” model if it is located on the left side of the frame.