Ryobi Brad Nailer Not Firing – Causes And Solutions

Table of Contents

The Ryobi Brad nailer is an excellent tool that comes in handy for wood-related projects. They are cheap and easy to use, making them ideal for small home projects.

Various compartments ensure this machine continues to fire nails at the proper pressure. However, sometimes you have an issue like the Ryobi Brad nailer not firing.

Like any machine with moveable and immovable parts, errors could arise for several reasons. It is essential to diagnose the errors and proffer the right solution properly.

Reasons Why Ryobi Brad Nailer Is Not Firing

There are several reasons why your Ryobi Brad nailer could stop firing. Some errors are more common.

However, they are mostly preventable. A regular maintenance procedure is one way to avoid these errors.

However, some issues are due to everyday use. Here are the likely causes of this error.

Worn Out O-rings

O-rings are part of the components that keep your device air-tight. When functioning correctly, the rings shut out decompressing air and keep the cylinder air-proof.

It does this by covering the head valve, which is the inlet to the cylinder.

The O-rings can wear out because of use as they are usually synthetic rubber or solid rubber. When they wear out, the Ryobi Brad Nailer stops firing.

Air leak through this part of the device is widespread, and you should always check it to see if that’s the problem.

If you notice that the Ryobi Brad Nailer is only blowing air, then worn-out O-rings are a likely cause.

Solution

It would be best to replace the worn-out O-rings before the machine develops further errors. You have the option of buying one at a local store or online.

You can contact local experts around you to help replace the worn-out O-rings.

Also, it is best to lubricate the cylinder regularly. This step will reduce the strain on the rings, making them last longer before another replacement.

Jammed Nails

Another common reason for Ryobi Brad not firing is jammed nails. Nails jamming happens for several reasons.

One can be due to the use of the wrong type of nails. The nailers always have designated sizes and models of fasteners, generally referred to as gauges.

If you use the wrong gauge of nails, this could jam the system.

Another reason for jammed nails is if there is an error with the nail angle. The fasteners used in this nailer are glued together at a certain angle.

The angle of the glued nail varies for different models. Using the wrong slant for your machine could lead to the Ryobi Brad not firing.

Solution

Removing the jammed nails will restore functionality to your nailer. While there are different designs, the basic steps are similar.

Here are the steps involved:

Power down the Airstrike device by disconnecting the battery.
Slide out the pressure or push it aside to remove the set of fasteners; this depends on your model.

Find the jammed nail and use a screwdriver to force it out. In some models, you need a plier to pull out the jammed nail.
Close up the release chamber.
Reconnect the battery to its position and insert a new set of nails in the magazine.

Faulty Trigger Valve

Another compartment of this engine that is worth inspection is the trigger. This compartment has a valve responsible for the trigger’s air-tight condition.

Suppose it becomes faulty due to constant use. It cannot generate the force needed to push the striker due to air leakage.

This error also leads to the nailer blowing air instead of nails.

Sometimes, the trigger does not function, which can happen due to defective valves.

This error is another example of a situation where your Ryobi Brad Nailer stops firing.

Solution

It is another problem which requires the replacement of a faulty compartment. You need to purchase the proper valve that fits your model of brad nailer is essential.

You can purchase this valve at any online store. The package usually includes instructions on removing and replacing the valve.

Follow the instructions, and you will have your nailer working optimally again.

Lack Of Lubrication

The rubber seals of the driver need lubrication to allow movement.

When your nailer has been in store for a long time, dust and rust can reduce the lubrication of the rubber seals.

You have issues like the Ryobi Brad nailer not firing if this happens.

Continuous use and loss of lubrication can also reduce the function of the movable parts.

Solution

Lubricating oil helps solve our problem in this case. One central area of concern is the cylinder’s inner walls.

This process involves removing the parts leading off to the cylinder wall and the striker. Here is the stepwise direction to lubricating the walls.

Lubricating the moving parts is necessary if you want the nailer to function efficiently. There will be some basic steps if you want to do this effectively.

For this step, you will hex keys of appropriate sizes, pliers, and lubricating oil. The steps involved are as follows:

Power down the device through battery disconnection.

The bottom bolt holds down the nail magazine. Removing it allows you to remove the fasteners and the whole magazine. You should also remove the screw holding this component down.
At the top side of the device, unclasp and unscrew the drive assembly.
Once the space is open, pour lubricating oil into the cylinder walls of the striker.

Pull up the striker multiple times. It will allow the oil to reach the inner parts of the cylinder, especially the rings.
Reassemble the parts by working your way backward.
Test the nailer by using it on defective wood. This step will also clean out the excess lubricant.

Battery Issues

The nail machine uses a base battery as the power source for nailing operations.

The battery ensures that the nail is delivered to the wood with enough pressure to drive it down. Issues with the battery could be why the Ryobi Brad nailer is not firing.

Low battery is one common reason your nailer might have firing issues. Another reason is faulty batteries.

Solution

It is part of the maintenance protocol to charge the battery regularly. Ensure to check the battery level before using the nailer.

It is necessary if you are going to work for a long. It must be replaced if the battery is fully charged but does not generate enough pressure.

If the battery is low but fails to charge, that is another clue to replace the battery.

Maintenance Issues

Failure to stick to proper maintenance issues can cause the Ryobi Brad nailer to stop firing. Both moveable and immovable parts of the nailer need maintenance.

Sometimes, all the components are in optimal condition but won’t fire due to lack of care.

Solution

It is good to check the owner’s manual and follow the maintenance procedure regularly.

Some common steps include lubricating the mouth of the gun before each nailing session. Another common maintenance step is always to clean the magazine.

Glue from the nails can build up in the magazine over time. Cleaning helps to remove the glue, making the magazine move freely.

Final Thoughts

Your nailer can perform at the top level for years if maintained properly. Avoid using nails that are not in clean conditions; this can also lead to errors.

Note that fixing issues with the nailer before continued use is essential. Hence, when Ryobi Brad nailer is not firing, check the various compartments for possible errors.

Once the error is correctly identified, you can quickly solve it.

With proper solutions and continued maintenance steps, you can continue to enjoy using the nailer for fast and simple projects.