Table of Contents
Like most hunters, you rely on feeders to help you bag more deer.
And if you’re like most hunters, you want to ensure your feeders work correctly before the hunting season starts.
In this blog post, we’ll show you how to test a Moultrie feeder so you can be confident that it will do its job during the hunt.
We’ll also give you some tips and tricks to make the testing process easier and more efficient.
So read on for all the information you need to know about how to test a Moultrie feeder!
Drilling Your Drum/Barrel/Bucket
If you’re testing a Moultrie feeder that uses a drum, barrel, or bucket to dispense feed, you’ll need to drill a small hole in the bottom of the container.
It will allow you to release the pressure inside the container as the feeder is used.
To do this, use a drill with a bit that’s the same size or smaller than the hole on the top of the feeder.
Drill the hole in the center of the bottom of the container and make sure it’s big enough for the pressure release valve to fit through.
Once the hole is drilled, attach the pressure release valve to the end of a piece of tubing. The other end of the tubing should be attached to a pump or device that can create suction.
When ready to test the feeder, place it in a sink or some other container that will collect any excess feed.
Then turn on the pump or suction device and wait until all of the feed has been released from the container.
If there’s still pressure built up inside the container, you’ll hear it escaping through the pressure release valve.
Once the pressure has been released, remove the feeder from the sink or container and reattach the lid. Be sure to clean out any leftover feed inside the container before using it again.
Mounting The Feeder
If you’re testing a Moultrie feeder that’s mounted to a post or tree, you’ll need to remove it from the post or tree before you start the testing process.
It will allow you to look at the inside of the feeder and ensure there’s no feed obstructing the gears or other moving parts.
Once the feeder is removed from the post or tree, use a screwdriver to remove the screws that hold the lid.
Be careful not to damage the screws, as you’ll need them to reattach the lid later. Once the screws are removed, lift off the lid and look inside.
If any feed obstructs the gears or other moving parts, use a screwdriver or your fingers to remove it. Once all of the feed has been removed, reattach the lid and replace the screws.
Please ensure they’re tight so the lid doesn’t come off again.
Putting The Feeder Back Up
Once you’ve finished testing the feeder, put it back in its original location. Be sure to check that all of the screws are tight and that the lid is securely fastened.
If everything looks good, you’re ready to start hunting!
Installing Battery
Caution: Wear Eye Protection
If your Moultrie feeder uses a battery to operate, you’ll need to install it before you start the testing process. To do this, remove the screws holding the battery cover.
The battery should be installed in the same orientation as in the picture below. Connect the negative (-) terminal to the black wire and the positive (+) terminal to the red wire.
Once the battery is installed, replace the battery cover and screws. Please ensure they’re tight so the cover doesn’t come off again.
Turn on the feeder by flipping the switch on the side of the battery cover. The feeder should start running immediately.
If it doesn’t, check to ensure the battery is connected correctly and the switch is turned on.
Once you’ve verified that the feeder is working correctly, reattach it to its original location. Be sure to check that all of the screws are tight and that the lid is securely fastened.
If everything looks good, you’re ready to start hunting!
Configuring And Testing Feeder
When testing a Moultrie feeder, it’s important to configure it according to the manufacturer’s instructions. It means setting the correct time, date, and feeding schedule.
It’s also essential to ensure the feeder is appropriately filled with feed. Once the feeder is configured, you can test it by dumping a bucket of water on it.
If the feeder works appropriately, the water will flow through the metering system and dispense feed into the trough.
If you’re having trouble getting the feeder to work, there are a few things you can do to troubleshoot it. First, make sure that the feeder is appropriately filled with feed.
If there’s not enough food in the hopper, the metering system won’t be able to dispense any feed. You can also try cleaning the metering system with a toothbrush or pipe cleaner.
If that doesn’t solve the problem, you may need to replace the metering system altogether.
In general, Moultrie feeders are reliable and don’t require much maintenance. However, testing them before hunting season is always a good idea to ensure they work correctly.
Follow these tips and tricks to make testing your Moultrie feeder easier and more efficient!
Tips & Pointers
What Battery Should I Use?
When it comes to choosing the correct battery for your Moultrie feeder, there are a few things you need to consider.
First, make sure that the battery is compatible with the feeder. Most Moultrie feeders use a 12-volt battery, so choose one that is compatible.
Next, consider the size of the battery. The battery should be large enough to power the feeder for at least a week without recharging.
Finally, consider the price and availability of the battery. There are a variety of batteries available on the market, so find one that fits your needs and budget.
When choosing a battery for your Moultrie feeder, it’s essential to choose one that is compatible and large enough to power the feeder for an extended period.
There are a variety of batteries available on the market, so find one that fits your needs and budget.
What Should I Do If The Timer Isn’t Working?
Check the connections to the battery to ensure alligator clips have not come loose. If they have, tighten them and try again.
If the problem persists, then you may need to replace the battery.
It’s also a good idea to check the manual with your feeder to ensure you’re using it correctly.
Sometimes, users make mistakes when setting up their feeders, leading to timer problems. If you’re still having trouble, contact Moultrie customer service for assistance.
When troubleshooting a timer issue, check the battery connections and consult the manual for help. If you’re still having trouble, contact Moultrie customer service for assistance.
Conclusion
Moultrie feeders are famous for hunters because they’re reliable and easy to use. When configuring and testing your Moultrie feeder, follow the manufacturer’s instructions.
Also, choose the correct battery and keep an eye on the timer to avoid any issues. By following these tips, you can ensure that your Moultrie feeder is ready for hunting season!
