Table of Contents
In a situation where you accidentally cut internet cable outside, you don’t need to panic. There are numerous ways to get you back on track.
This article will discuss the steps necessary to restore network services. However, the necessary tools are discussed first below.
Necessary Tools And Accessories For The Repair Of A Damaged Internet Cable
When you plan the task of repairing the network cables, it is essential that you have a solid understanding of the various components and how they will influence the total cost that you will incur.
Choose to fix the broken internet cable on your own. You won’t have to pay the fee that’s usually associated with hiring a technician to do the job.
Because of this, you will need to acquire some essential tools to assist you in this task. The following are of necessity.
Wire Stripping Tool/Wire Cutter (Often Costs About $14)
A wire stripper/wire cutter is an instrument that can be used to cut wire or remove the electrical insulation from electric lines.
The instrument resembles a pair of scissors because it has two blades that cut in opposite directions. Both of these functions are performed on the same device.
To save you the cost of purchasing two different tools (Wire Stripping Tool and Wire Cutter).
It is advisable to get the two-in-one tool with both the wire stripping and cutting function. You can get this tool at an average price of $14.
The F Connector ($5.99 – $9.00)
The F connector, also known as an F-type connector, is a coaxial RF connector commonly used internationally for satellite television and internet services.
RG-6 cable is typically used with this connector. When joining cables using F-Connectors, even the slightest error might result in losing all signals.
It is true regardless of how easy the process may be. Keep an open mind, but don’t dismiss anything out of hand.
The connection of the RF signal line to the F-Connector is the component in every satellite installation. It is by far the most common occurrence.
Because of this, becoming familiar with using an F-Connector to connect internet cables can benefit you.
Depending on the outlet, the F-type connector can be purchased for between $5.99 and $9.00.
Coaxial Cable ($8.00 – $10.00)
A type of electrical cable known as coax has an inner conductor surrounded by a concentric conducting shield.
In a cable, the space between the two conductors is filled with an insulating material, and the entire cable is wrapped in a protective outer sheath.
There are many benefits associated with coax.
One of the most significant benefits is that lengths of coaxial cable may be connected near to metal objects without the power being diminished.
In addition to this, the signal is shielded from any electromagnetic interference that may originate from the outside by using coaxial cables.
You may purchase a coaxial cable with a length of 3 feet for approximately $8.00, 6 feet for $8.99, or 10 feet for $9.99.
It is up to you to select which option best suits you. After getting all the necessary tools and accessories, follow the steps below to fix the cable.
The Steps To Take When You Accidentally Cut The Internet Cable Outside
If you discover that the internet cable you cut is broken or has been sliced in two, this article will enable you to repair that cable so that you do not need to purchase a new one.
Step 1 – Confirm The Damaged Part
Find the section of damaged wire that has to be fixed. In most cases, cutting the section will result in a too-short wire.
You will think about adding additional cable so that it will get much longer.
Step 2 – Locate The Central Cable
You will need to clean the cable area to create space for your work.
Using the wire cutters, remove the covering of either end of the cut cable to reveal the smaller wire located directly in the middle.
If there is a tangled section of the wire, you should remove that section.
Step 3 – Attach Twists
You will need to attach the two twists you purchased to the appropriate connectors. To tighten, slide them over the cable ends and turn them clockwise.
The inner wire must be inserted through the connector.
Step 4 – Attach F-Adapters
The F-adapters are constructed out of high-quality brass, have nickel plating, do not cause any signal loss, and are simple to set up.
Hence, an F-adapter should be screwed onto each F-connector.
Step 5 – Attach Coaxial Cable To Each F-Adapter
At this point, you are ready to attach the cable (which you already purchased) to the F-adapters that have been attached.
Step 6 – Test And Affirm Your Work
The final stage of your task is to confirm that the cable is now working perfectly. If otherwise detected that it’s not working well, go back to step 1 and retrace your steps.
At this point, you should have a better connection. If you still have a problem repairing the cable, you can follow the next step.
What Else Can I Do If I Still Find It Difficult To Repair My Internet Cable?
You don’t need to waste time contemplating how you solve your internet cable problem. You can hire a technician to get the work done in no time.
The work of a Network Cable Technician comprises the construction of the underlying framework for telecommunications networks of various types, including Local Area Networks (LANs), Wide Area Networks (WANs), and Cable TV (CATV).
Due to the highly technical nature of the services, they are experts in building and installing networks that satisfy the customers’ requirements and are in line with the industry standards that have been established.
They must install, troubleshoot, and maintain video and data cables and copper and fiber cabling infrastructure, following the standards of the businesses in which they are employed.
However, firms that provide internet access will recommend that you get in touch with them as soon as possible rather than attempting to fix the problem on your own.
If you accidentally damage their cables or notice their network has been compromised.
Conclusion
Repairing the cable for your home network is something you can handle on your own. If you are prepared to put in the effort and invest the necessary time.
Although it is not an insignificant expense, the cost of repairing internet cable alone typically constitutes a relatively small portion of the total cost of installing a network.
Despite this, many individuals will opt to have a professional fix their network cable, which will result in paying some labor fees.
Although the specific costs may vary depending on your situation, one thing is sure: the labor will not be provided without charge.
With these, it is advisable always to try all you can to avoid damage to the internet cable.
